Log. .
Reproduced in 2010-03/20/05: 36 comments (0).
Before the beginning of this article, we first of several focal points for the all clear up doubts. .
1. What is a display of the factory pattern? factory pattern is the manufacturers in the design of the circuit to some of the features that are not normal user open. Through a special way, by modifying the storage data or other means to monitor and maintain.
Second, the factory pattern can be done? Manufacturers due to different display some features slightly different definitions, such as a collection of some less frequently used distortion, linear distortion, convergence, color purity, accelerating voltage and so forth, when the display has a number of software failures, they can help It does not repair the circuit on the basis of solving the problem. Software fault mentioned here, refers to as brightness, color, color purity, convergence, set distortion, linear distortion, position size, etc., if the user's display is not bright, or jitter, or is caused by the circuit elements fault, that factory pattern can not be resolved. .
Third, the factory pattern of inappropriate action herein due to the different manufacturers factory pattern of built-in features. Some monitor factory pattern is more than a normal feature that, if the regulating effect of improper only. But part of the manufacturer's factory mode feature quite rich, accidentally of mishandling can monitor have a great impact, such as to affect the display of some functions or even cause the monitor does not work. Therefore we advise you to use caution when the factory pattern, it is not clear a feature before, it is best not to mess, the resulting consequences we don't take any responsibility.
However, as stored in the engineering model such as: LCD accumulated usage time or date of production, and even LCD panel types and some other important parameter, so the purchase of LCD friend, enter the factory pattern is Yanzheng see some information about whether the LCD is an important new method , but also to buy second-hand LCD's friends provided important reference value because the shorter the time to use the more worth buying.Therefore, we announced our well-known brands currently available LCD into the factory pattern, and I hope to everyone to buy LCD helps when we compare different monitor manufacturer's factory pattern to provide information on what's the difference.
** Into the Samsung LCD factory pattern. .
The State, the first in the OSD menu and the brightness and contrast values are transferred to 0, then access the OSD menu of "information" page, hold down the "SOURCE" button (that is, the ENTER key) and hold for 5 seconds to keep the center of the screen will appear the "SERVICE" menu FUNCTION, at which point you can enter work mode. Some Samsung's monitor does not have SOURCE keys, then press the ENTER () key and results are the same.
** LG LCD monitors into the factory pattern. .
In shutdown mode, first press the "MENU" key, then press the "POWER" key on the monitor, bring up the OSD menu appears at the end of the new option to enter.
** Into the ViewSonic LCD factory pattern. .
In shutdown mode, first press the "2" and press the power key to turn on the monitor and the light is yellow. Then press "1" to open the menu. Which appears at the bottom right corner of the "F" Word to the color bar to go above and press the "2" to open.
** Acer LCD monitors into the factory pattern. .
In shutdown mode, while holding down the "AUTO" and "MENU" key, then press the "POWER" key on the monitor. At this point, press "MENU" key to open the OSD menu, you will find the OSD menu is not usual in the middle of the screen, but the left side of your screen. Its upper-left corner has a red "F" symbol is used to adjust the left and right keys "F" symbol, press the "MENU" key to enter the factory pattern.
** BenQ LCD monitors into the factory pattern. .
BenQ LCD early general and later in the LCD monitor into the factory pattern method slightly, we should pay attention. Early products to enter the factory pattern using a shutdown mode, press the "MENU" and "EXIT" key and press the "POWER" key on the monitor. Post and then pressing the "I" button.
In addition, the launch of the BenQ 2006 new products into the factory model as follows: First off, press the power button, OK button and menu button, the boot after the press "↓" to enter. .
** Enter the Philips LCD monitor factory pattern.
In the off state, while holding down the "AUTO" and "MENU" button, then press "POWER" key to open the display. Then press "MENU" key to open the OSD menu, OSD menu will find new options appear, select the entry you can post. (Some models need to hold down the "AUTO" and "OK" key to boot, open the OSD menu can be entered). .
** Enter Dell LCD factory pattern.
In shutdown mode, first press and hold "ENTER" key and "+" key, then press the power key to open the display. Press "MENU" button. .
* Enter the AOC LCD factory pattern.
Press "MENU" bring up the main menu, will be moved to full-screen color scale on the icon, long press "MENU" key, you can enter the AOC of the factory pattern. .
First, the Acer (Acer).
In shutdown mode, the first while holding down the "AUTO" and "MENU" button, then press "POWER" key to open the display. Then press "MENU" key to open the OSD menu, OSD menu will be found not to appear in the center of the screen as usual, but left of the screen, the top left corner of a red "F" symbol, with the left and right key to adjust the cursor to the "F "symbol, press" MENU "button. .
First, shut down state, first press and hold the MENU key, AUTO, and then press the POWER key to boot.
Second, after boot, all the keys are open. .
3. press the MENU key, then desktop pop-up menu in the upper-left corner, but it has the word F.
4, then the menu left, move the icons on the F word. .
5. press the MENU key, you can enter the ACER factory pattern slightly * _ *.
In the plant model, we can see a lot of useful information on our: If the LCD using the time, the panel version of the information. .
Second, BenQ.
BenQ LCD common early and late in the LCD display to enter the factory mode is slightly different, we should pay attention. .
Early products to enter the factory pattern using a shutdown mode, press the "MENU: EXIT" and "key and press the" POWER "key on the monitor. Post and then pressing the "I" button.
1, turned off, the first press and hold the "MENU" key and "EXIT" key, press POWER button in the boot. .
Second, after I press the "power" key to enter the factory pattern.
We can see that the early products of the factory BenQ model for the average consumer very little useful information, are all relevant professional color settings option #_#~。 .
In addition to the new BenQ LCD (such as FP241WZ) into the factory pattern as follows: first off, press the power key, the OK button and the menu button, turn on after you press the "next" to go.
BenQ factory pattern as consistent, but in the bottom part of the panel information and product factory time, still very valuable. ^ _ ^. .
3. LG.
In shutdown mode, first press and hold the "MENU" button, then press "POWER" key to open the display, adjust the OSD menu will appear at the end of the new option, enter the can. .
First, shut down state, first press the "MENU" key, then press the POWER key to boot.
2, then press the MENU button to enter the factory mode slightly. .
The LG products of the factory pattern, we can get very much for a normal player useful information: the type of the products, product delivery dates, F-ENGINE chip versions, Panel information, etc..
4, ViewSonic. .
Shut down state, first press the "2" and press the power key to turn on the monitor and the light is yellow. Then press "1" to open the menu. Which appears at the bottom right corner of the character "F", move the cursor to go above and press the "2" to open.
1, turned off, the first press and hold the "2" key then press POWER key. .
2. turn on the monitor, press "1" key to enter the menu.
Third, the menu options at this time last more than a "Factory menu" option. .
4. now press the "2" key to enter the factory pattern slightly.
5, Samsung. .
The State, the first in the OSD menu and the brightness and contrast values are transferred to 0, then access the OSD menu of "information" page, hold down the ' SOURCE "key (ENTER key) and hold for 5 seconds to keep the center of the screen will appear the" SERVICE "menu FUNCTION.
1, the first menu in the OSD brightness and contrast values will be adjusted to 0. .
Second, and then access the OSD menu of an item of information, press and hold the ' SOURCE "key (ENTER key) to keep it down for 5 seconds, you can enter the factory pattern slightly.
Some of Samsung's display is not SOURCE button, then press ENTER (OK) key effect is the same. .
Samsung 205BW factory mode information and information of the factory pattern 931C is the same.
Samsung 930BA in the factory pattern, we can see the LCD driver IC circuits of information-MCU for the Genesis chip, this and other Samsung products are quite different. ^ _ ^. .
6. Philips.
And ACER similar to the shutdown state, while holding down the "AUTO" and "MENU" button, then press "POWER" key to open the display. Then press "MENU" key to open the OSD menu, OSD menu will find new options appear, select the entry you can post. (Some models need to hold down the "AUTO" and "OK" key to boot, open the OSD menu can be entered). .
First, in the shutdown mode, while holding down the "AUTO" and "MENU" key, then press the "POWER" key on the monitor.
2, then press "MENU" key to open the OSD menu, OSD menu will find new options will appear. .
3. Select the OSD cursor.
Fourth, you can press ENTER to enter the factory mode ^ _ ^. .
7. DELL.
In shutdown mode, first press and hold "ENTER" key and "+" key, then press the power key to open the display. Press "MENU" button. .
First, shut down, first press and hold the "AUTO" and "+" key, then press the power key to turn on the monitor.
2, and then "MENU" button. .
3. Enter the menu appears at the end of the FACTORY RESET option will be more of a "Factory" option.
Fourth, select the Press "Enter" to enter can be. .
。.
From the firm's perspective, the general pattern does not approach these plants to spread, after all, most users are not particularly familiar with the display, enter the factory mode tends to be mixed or even loss of display. However, such a development on the Internet today, the public release of these methods is sooner or later. These editors hope that the brand from the factory model to obtain useful information on their own, to buy their own brand LCD help. .
Acer.
In shutdown mode, the first while holding down the "AUTO" and "MENU" button, then press "POWER" key to open the display. Then press "MENU" key to open the OSD menu, OSD menu will be found not to appear in the center of the screen as usual, but left of the screen, the top left corner of a red "F" symbol, with the left and right key to adjust the cursor to the "F 'symbol, press the "MENU" button..
Acer AL1916W.
Acer LCD monitors into the factory pattern is basically the same way. .
In shutdown mode, first press the "AUTO" and "MENU" key, then press the "POWER" key on the monitor. No, all the buttons are released, press "MENU" key, OSD menu will pop up, but the menu is not usual in the middle of the screen, but the left side of the screen, it appears red in the upper-left corner of the "F" symbol, use the cursor left and right keys to adjust to the "F" symbol, press the "MENU" button.
BenQ. .
1. first of all, in shutdown mode, while holding down the display of the "ENTER" and "MENU" key ". Then press the power switch to turn on the monitor. After pressing the "MENU" key, then press the "monitor" button, AOTU appears in Factory mode menu.
2, the early products into the plant model is: In the off state, press and hold "MENU: and" EXIT "key, press the" POWER "key to open the display. Boot and then press" i "button ..
3 new LCD, BenQ (e.g. FP241WZ) into the factory pattern as follows: first off, press the power key, the OK button and the menu button, turn on after you press the "next" to go.
The new LCD is different, such as BenQ has always been the factory pattern, but in the bottom part of the panel information and product factory time, still very valuable. .
LG。.
1, first of all, in the off state, first hold down the "MENU" button "without letting go. And then turn the power switch. When turned on, then press" MENU "menu button, there will be new options, move the cursor to new options, press "ENTER" key to enter the factory mode..
2. Shutdown state, first press the "MENU" key, then press the "POWER" key on the monitor, bring up the OSD menu appears at the end of the new option to enter.
LG next window LCD L1510S. .
Panel keys: "MENU" and "DOWN", "UP" (LIGHTVIEW), the "LEFT" and "RIGHT" (BRIGHTNESS), SELECT the "AUTO/" and "POWER".
Factory pattern: First, turn off the monitor power, then hold down the "MENU" button Bu Songshou, open the display power switch, so when the screen appears, release the hand image, the next time you press the "MENU" button, a menu appears on the screen shall be factory mode menu. .
In most of the factory pattern, the following line lists the model of the monitor, the monitor's power on time, software version and software release time. However, the monitor's power on time ELAPSED through "CLEAR" option to clean it.
LG next window LCD L1520B. .
Panel: Panel: "MENU" and "DOWN", "UP" (LIGHTVIEW), the "LEFT" and "RIGHT" (BRIGHTNESS), SELECT the "AUTO/" and "POWER".
Factory pattern: First, turn off the monitor power, then hold down the "MENU" button Bu Songshou, open the display power switch, so when the screen appears, release the hand image, the next time you press the "MENU" button, a menu appears on the screen shall be factory mode menu. .
LG LCD L1715S. future forms.
Panel buttons: push button: "MENU", "DOWN", "UP" (LIGHTVIEW), "LEFT", "RIGHT" (BRIGHTNESS), "AUTO / SELECT", "POWER". .
The factory pattern: L1520B.
LG next window LCD L1720B. .
Panel: Panel: "MENU" and "DOWN", "UP" (LIGHTVIEW), the "LEFT" and "RIGHT" (BRIGHTNESS), SELECT the "AUTO/" and "POWER".
Factory pattern: with LCD L1715S. .
LG LCD L1730S. future forms.
Panel buttons: "MENU ","-/ Engine ","+"," SET / AUTO", "POWER". .
The factory pattern: first, turn off power to the monitor, and then press the "MENU" key and turn on the monitor power switch, wait screen appears when you release the hand, and then press the "MENU" key, the screen will pop up a MENU of "SERVICE" menu. In the MENU "SERVICE" menu displayed on the monitor's model number, software version, the software release time. In the SERVICE MENU menu you can adjust the color temperature of 6500 9300, RBG three colors in bright and dark balance and three color of gain and offset values.
ViewSonic. .
1. first of all, in shutdown state, first press and hold "1" key. Then turn on the power switch on, press "1" key to enter menu, the menu will appear underneath Factory menu "option, select to enter the factory pattern.
2, turned off, the first press and hold the "2" while pressing the power key to open the display, then the light is yellow. Then press the "1" to open the menu. Where the lower right corner appears "F" character, move the cursor to the top to press "2" to open. .
3, shutdown state, first press the "2" key and then press the POWER key. Turn on the monitor, press "1" key to enter the menu. This menu option to last more than a "Factory menu" option. Then press "2" key to enter the factory pattern.
ViewSonic new LCD appears "OSD LOCKING" exclusion. .
OSD OSD Lock LOCKING, simply press and hold display "1" key and "on" key, and you can keep 15s "OSD Lock" feature on and off.
ViewSonic new LCD appears "POWER LOCKING" exclusion. .
POWER LOCKING power lock, simply press and hold display "1" key and "down" key, and keep you on the "15s power lock" feature to lock and unlock.
Samsung. .
First of all, in turn, to display OSD menu of brightness and contrast values are 0, and then hold down the "SOURCE" button (that is, the ENTER key) are not placed to maintain 5 seconds, the screen will appear the "SERVICE" menu FUNCTION. You can enter the factory pattern.
For some there is no "SOURCE" key to the model, press "ENTER" button. .
Samsung 205BW factory mode information and information of the factory pattern 931C is the same.
Samsung 930BA in the factory pattern, we can see the LCD driver IC circuits of information-MCU for the Genesis chip, this and other Samsung products are quite different. .
Philips.
First of all, the shutdown state, while holding down the display's "AUTO" and "MENU" "The two keys. Then, press the power switch to display. Boot and then press the" MENU "menu button, there will be new option, move the cursor to the new options, press "ENTER" key to enter the factory mode..
It is important to note that due to the differences between the product model, some models may in accordance with the above operation is not valid, cannot enter the factory pattern. Therefore, you need to hold down the "AUTO" and "OK" in the two key posts in order to enter the factory pattern.
DELL. .
In shutdown mode, while holding down the "ENTER" key and press the "+" key, then press the power key to turn on the monitor. Then press "MENU" button.
First, shut down the state, the first while holding down the "AUTO" and "+" key, then press the power key to open the display. .
Second, and then press the "MENU" button.
3, this time into the final FACTORY RESET menu option will be more than a "Factory" option. .
IV. selected by pressing the "Enter" to enter.
DELL E172FP. .
Unplug the power cable, press and hold the menu key and then connect the power cord, and then power on, press and hold the menu key until the menu appears..
Hold down the menu button for 30 seconds, to enter the lock / unlock status. .
Founder FG560-PE (TPV).
In the display turned on, press and hold "MENU" button, unplug the monitor and then plug the power cord to enter the factory mode. Note that in the swap process must always hold down the "MENU" keys. .
Founder, digital FZ560-SB FZ780-ND/NG/ST, etc..
First disconnect the power plug, hold down the "AUTO" and "MENU" The two key link, then plug the power supply can be. .
Hyundai ImageQuest Q15.
Panel buttons: "MENU", "SELECT (AUTO)", the power switch "◎", "↓ (Brightness)", "↑ (Contrast)". .
The user mode options: brightness, contrast (B), (C), the color of the control (Color Control), position (Position Control), clock phase adjustment (Clock Phase), Auto-adjust (Auto Adjust), MISCELLANEOUS, language (LANGUAGE).
Factory mode: Press "MENU" button Bu Songshou, open the display power switch, so the image appears on the monitor screen when let go. Then press the "MENU" appears when a small menu at the top of the software version number, the menu content is only three, as "the brightness (Brightness)", "clamp level (BLACK LEVEL)", "initialize memory (INIT EEPROM) ". .
If you press "↓" or "+", and then press to enter the user mode.
Modern LM1500. .
Panel keys: "AUTO/EXIT" and "←/B", "→" Menu ",/C", "@" power switch.
Factory mode: Unknown. .
Key lock: first turn off power to the monitor, and then press the "MENU" key and turn on the monitor power switch, and images on the screen, the screen on the monitor's OSD menu will prompt "screen OSD menu is locked".
Unlock method approach with the lock. .
Hewlett Packard HP.
There are two ways on the HP line. .
1. Enter the project model W2207: shutdown, press the Menu button while the power-on, bring up the OSD menu, the selected Service.
2, turn off the display - Press and hold MENU, then press the power switch - MENU and hold until you see the search signal, and wait for the search signal disappears - Release the MENU button, then press a MENU button, and then see an English menu , and then look for panel information. .
Hewlett Packard HP Pavilion F1503.
Panel buttons: power switch "◎", "MENU ","-/ B ","+/ C", "Select / Auto". .
The factory pattern: first turn off the monitor power, by hand and hold the "MENU" key grimdeath, and then open the monitor power switch until the image is to appear on the screen, and then release the hand. Then press the "MENU" key, the screen will pop up a new MENU "Service" menu.
Hewlett-Packard HP Pavilion F1523. .
Panel keys: "MENU" and "-" +/Auto "," power switch "@".
Factory pattern: with the 1703, press "MENU" button Bu Songshou boot, so images appear on the screen and release, it entered the factory pattern. .
User mode of the OSD menu in Orange and green, the factory pattern. Factory pattern than the user mode has a "Service", you can view the monitor work schedules and the use of the backlight.
Hewlett-Packard HP Pavilion F1703. .
Panel keys: power switch "@", "MENU" and "-", "+/B/C", "Select/Auto".
Factory pattern: First, turn off the monitor power, then hold down the "MENU" button Busong Shou, and then turn on the monitor power switch until the image appears on the screen and release the "MENU" button. Then the screen will appear a "Service Menu" OSD menu. In the Service Menu on the menu software version number and date (non-display production date), you can also find displays of working hours and other information. .
Hewlett Packard HP F1723 Pavilion.
Panel buttons: "MENU ","-/ Auto ","+", power switch" ◎ ". .
The factory pattern: F1703.
Panda (PANDA) 5003L6. .
Panel keys: "AUTO", "-", "POWER", "+", "SELECT".
Factory pattern: First, turn off the monitor power switch, press and hold the "SELECT" button Busong Shou, and then turn on the monitor power switch, so the screen image appears, and then let go. .
Hisense HG560-FA (TFT1560PS).
Panel buttons: "AUTO", "← / B", "→ / C", "MENU", the power switch "◎". .
The factory pattern: an unknown.
Locking OSD menu: Turn off the monitor power, hold down the "MENU" button Busong Shou, and then press the power switch, so the screen image the open hand appears, then press the MENU key, then we will pop-up OSD menu is locked reminder However, AUTO and B, C can also use. .
Unlock method with the lock method above.
TCL ML520. .
Panel keys: "+" and "-", "MENU (menu)," power switch.
Factory pattern: First, turn off the monitor power, then hold down the "MENU" button Bu Songshou, then open the monitor's power switch, and other content appears on the screen let go of the image, then display the factory pattern to enter the state. .
TCL ML56。.
Panel button :"-"," MENU ","+" and power key (the lower part of the display panel). .
Factory pattern entry mode: the power switch to turn off the display, press the "MENU" key grimdeath, and then open the monitor power switch, and images on the screen, release the hand. Then press the "MENU" key, the upper-right corner of the screen, a green and white and yellow, very visible, lower part of the English "," said this FACTORY-ADJ as factory mode. Main function is to monitor internal control functions of the three major chip adjustment (ASI32X, AD9884, TW98), with three-color RGB adjust white balance and dark balance, brightness and contrast adjustment, U, V gain adjustment; still "AUTO ADJUST" (automatic adjusted) and "INIT ALL" (initialize all). .
AOC。.
First of all, turned on, press and hold display "MENU" button, then unplug the power cord, then plug the power cord, then release the hold down the "MENU" button. .
Then press the "MENU" menu key, the left corner there is a new option "F" keys select, around with the "F", then press the "MENU" key to enter the factory pattern.
Great Wall. .
First of all, in shutdown state, first press the "MENU" key. Then turn on the power switch. Press the "MENU" menu key to enter the factory pattern.
Lenovo L171. .
The machine should be turned off the input 220V power supply, first press and hold the MENU key, and then power it on, the screen will appear after "AUTO LEVEL will automatically adjust the screen. Press the MENU key, plug power, the OSD menu is located in the upper-left corner of the screen. Finished, direct power off.
ASUS. .
First, shut down state, press the "MENU" key ". Then press the power switch to turn on the monitor. Power on again after pressing the "MENU" menu key to enter the factory pattern.
Source citation factory pattern display summary - Qzone log. .
